š Up to 70% Off Selected ItemsShop Sale
1 / 4
HD Delrin Shift Rod Bushing for 1960-79 Beetle Ghia 50-66 Bus Type 3 Thing DBH-111-259
Heavy Duty USA-Made shift rod bushing made of high quality Delrin. These shifter bushings replace the stock soft and failure prone bushing with a long lasting replacement that also improves shifter feel. Alternate part numbers 111259, 111-259, replaces 111701259A, 111-701-259A.
Made in USA.
DBH-111-259
Tech Tip: These bushings are made to very precise measurements. You must ensure the hangar is smooth, free of burrs, and properly sized to fit this bushing. Most original hangars have flared edges from years of use and will require cleaning up or edges filed back to fit. Aftermarket hangars are not the exact thickness or have paint/coatings that need to be filed and cleaned up to fit. Your shift rod must also completely smooth and free of ridges or burrs. Remove any burrs or ridges on the shift rod and the hangar bracket.
Made in USA.
DBH-111-259
Tech Tip: These bushings are made to very precise measurements. You must ensure the hangar is smooth, free of burrs, and properly sized to fit this bushing. Most original hangars have flared edges from years of use and will require cleaning up or edges filed back to fit. Aftermarket hangars are not the exact thickness or have paint/coatings that need to be filed and cleaned up to fit. Your shift rod must also completely smooth and free of ridges or burrs. Remove any burrs or ridges on the shift rod and the hangar bracket.
Heavy Duty USA-Made shift rod bushing made of high quality Delrin. These shifter bushings replace the stock soft and failure prone bushing with a long lasting replacement that also improves shifter feel. Alternate part numbers 111259, 111-259, replaces 111701259A, 111-701-259A.
Made in USA.
DBH-111-259
Tech Tip: These bushings are made to very precise measurements. You must ensure the hangar is smooth, free of burrs, and properly sized to fit this bushing. Most original hangars have flared edges from years of use and will require cleaning up or edges filed back to fit. Aftermarket hangars are not the exact thickness or have paint/coatings that need to be filed and cleaned up to fit. Your shift rod must also completely smooth and free of ridges or burrs. Remove any burrs or ridges on the shift rod and the hangar bracket.
Made in USA.
DBH-111-259
Tech Tip: These bushings are made to very precise measurements. You must ensure the hangar is smooth, free of burrs, and properly sized to fit this bushing. Most original hangars have flared edges from years of use and will require cleaning up or edges filed back to fit. Aftermarket hangars are not the exact thickness or have paint/coatings that need to be filed and cleaned up to fit. Your shift rod must also completely smooth and free of ridges or burrs. Remove any burrs or ridges on the shift rod and the hangar bracket.
$37.99
HD Delrin Shift Rod Bushing for 1960-79 Beetle Ghia 50-66 Bus Type 3 Thing DBH-111-259ā
$37.99
Description
Heavy Duty USA-Made shift rod bushing made of high quality Delrin. These shifter bushings replace the stock soft and failure prone bushing with a long lasting replacement that also improves shifter feel. Alternate part numbers 111259, 111-259, replaces 111701259A, 111-701-259A.
Made in USA.
DBH-111-259
Tech Tip: These bushings are made to very precise measurements. You must ensure the hangar is smooth, free of burrs, and properly sized to fit this bushing. Most original hangars have flared edges from years of use and will require cleaning up or edges filed back to fit. Aftermarket hangars are not the exact thickness or have paint/coatings that need to be filed and cleaned up to fit. Your shift rod must also completely smooth and free of ridges or burrs. Remove any burrs or ridges on the shift rod and the hangar bracket.
Made in USA.
DBH-111-259
Tech Tip: These bushings are made to very precise measurements. You must ensure the hangar is smooth, free of burrs, and properly sized to fit this bushing. Most original hangars have flared edges from years of use and will require cleaning up or edges filed back to fit. Aftermarket hangars are not the exact thickness or have paint/coatings that need to be filed and cleaned up to fit. Your shift rod must also completely smooth and free of ridges or burrs. Remove any burrs or ridges on the shift rod and the hangar bracket.
